During the conveyor belt hot splicing process, the following details need to pay attention to:

  1. Temperature control: The vulcanization temperature must be controlled within the specified range, otherwise it will affect the quality and service life of the conveyor belt.
  2. Pressure control: A certain pressure must be applied during vulcanization to ensure the quality and strength of the conveyor belt splice. Therefore, it is necessary to ensure the normal operation of the vulcanizer’s pressure control system and monitor and adjust the pressure.
  3. Time control: The vulcanization time must be controlled within the specified range. If it is too short, it will result in poor splices quality, and if it is too long, it will affect production efficiency.
  4. Operating standards: Operators need to be familiar with the operating procedures of the press vulcanizer and operate correctly according to the requirements to avoid accidents caused by improper operation.
  5. Safety protection: During the vulcanization process, safety protection should be taken into account, such as preventing accidents such as explosions and fires. At the same time, ventilation and protective measures should be taken to avoid harmful gases and high temperatures affecting the operators.