-
Fabric Reinforced Repair Strip(repair band) is made by neoprene based CN bonding layer on one side and NR & SBR etc rubber compound, it reinforced with fabric layer to increase tensile strength. Our Fabric Reinforced Repair Strips produced complying with global standards including DIN, AS(Australia), EN-ISO(Europe), etc. -
Impact bar used in the loading area of the belt conveyor to replace the traditional cushion rollers. It is designed to absorb impact loading which will dramatically reduce shock and stress loading to the structure. -
Impact Bed is used at the loading point of the conveyor belt to replace the traditional cushion rollers.It can avoid the abrasion and tear by sharp materials and prevent materials from falling and scattering. -
Plain Rubber Pulley Lagging is applied in order to extend the life of the shell by providing a replaceable wearing surface or to improve the friction. It is generally used in Drum, Pulleys, and Bulk Material Handling & Conveying. Plain Rubber Pulley Lagging provided with Bonding Layers for easy installation with cold glues. The plain lagging can be used to eliminate belt spillage, water-shedding, and increase pulleys' service life. -
The primary belt cleaner is installed under the center line of the head drum. It is suitable for primary cleaning of materials with large water content, and for one-way operation, cleaning of the conveyor belt of mechanical, cold, or hot vulcanized joints, protecting the belt from damage and prolonging the service life of the belt. -
Reinforced Diamond Repair Patches have an extremely tough cover stock and beveled edges, they are mainly used for maximum puncture resistance. They are used in the event of small or large damages on rubber linings of conveyor belts. Reinforced diamond repair patches especially better used for repairing damages that request higher tensile strength
-
Super Screw Splice Conveyor Belt Fastening System is a new rubber conveyor belt splice method, It is a significant advancement in conveyor belt splicing, offering notable advantages such as quick installation, high stability, low consumption, and extended lifespan. -
Standard Repair Strip (Repair Rectangular Patch) is made of synthetic rubber compound with a superior quality semi-vulcanized bonding layer on one side. It is a high wear-resistant, and natural rubber strip designed for use to repair damage to conveyor belt covers. As the authentic CN layer(bonding layer), our repair strip doesn’t need to polish before use and the CN layer can be bonded with Rubber directly. Our bonding layer's other characteristic is that its adhesive force increases with time, while the adhesion of the inferior CN layer adhesion doesn’t change over time. -
The T2 glue gun adopts the principle of cold vulcanization. When using it, the AB glue strip needs to be filled inside the glue gun. Under the action of the A+B composite adhesive, it can be integrated with the original belt to prevent delamination and shedding. It can completely avoid the occurrence of rework. -
Tungsten Carbide Buffing Disc is designed for buffing rubber and fabric. It makes the surface rougher to increase the bonding effect which the ordinary wire wheels can not match while avoiding the aging process of the buffing surface. -
Tungsten Carbide Grinding Wheels are designed for buffing rubber and fabric. it is used for grinding curves and uneven surfaces as well as hard-to-access areas. Little heating of surfaces. -
Two-Component Repair Strips are made of a polymer material plus-function additive composition, It is used for filling injuries in belts and vulcanizes to a resilient 55-60 Shore A hardness
