-
CN Filler Rubber is a black, premium grade, thin rubber sheet with CN bonding layers on both sides, it is designed for use in repairing conveyor belts or bonding rubber to steel surfaces. it features a self-extinguishing, antistatic, and moderately oil-resistant formulation, with CN layers on both sides for maximum adhesion. it is ideal for repair of longitudinal breaches, damaged top coating, and damaged edges of conveyor belts of all types including those reinforced with metal and aramid cord, and also for finishing of splice during pulley lagging. -
Conveyor Belt Repair Fabric is especially used for the repair of damage to conveyor belt ply and covers in heavy operating conditions or applications, which require maximum tear strength and puncture resistance. -
Standard Rubber Repair Strip (Repair Patch) is made of synthetic rubber compound with a superior quality semi-vulcanized bonding layer on one side. It is a highly wear-resistant, and natural rubber strip designed for use to repair damage to the conveyor belt. As the authentic CN layer(bonding layer), the Adhesive Force reached about 9N/mm after bond 72 hours. and the CN layer's featured characteristic is that its adhesive force increases with time, while the adhesion of the inferior CN layer adhesion doesn’t change over time. -
Diamond repair patches are used for minor damage repair of the conveyor belt, they are designed as material for simple quick, and durable repair of surface damage on the conveyor belt, they mainly make in Rhomboid and Round Shapes. -
Fabric Reinforced Repair Strip(repair band) is made by a neoprene-based CN bonding layer on one side and NR & SBR, etc. rubber compound on the other. It is reinforced with a fabric layer to increase tear strength and puncture resistance. Our Fabric Reinforced Repair Strips CN layer Adhesive Force reaches about 9N/mm after 72 hours of bonding. It is a reliable repair materials for your conveyor belt repair. -
Reinforced Diamond Repair Patches have an extremely tough cover stock and beveled edges, they are mainly used for maximum puncture resistance. They are used in the event of small or large damages on rubber linings of conveyor belts. Reinforced diamond repair patches especially better used for repairing damages that request higher tensile strength
-
Ceramic Pulley Lagging is designed to be applied to conveyor drive pulleys operating in extreme conditions. It is suitable for use in wet and dirty conditions and high belt tension applications. It can also be used in conditions of dirt, icing, or steep slopes -
Diamond Rubber Pulley Lagging is the most commonly used lagging sheet, it is suitable for lagging drive roller of fabric conveyor belts and high-strength steel cord conveyor belts, It features diamond patterns engraved on a wear-resistant rubber base, providing higher friction compared to plain rubber pulley laggings. This increased friction enhances the power output efficiency and stability by improving the friction between the drive roller and the conveyor belt. and the diamond rubber pulley lagging is pre-grooved, with diamond-shaped grooves that expel debris, protecting the roller from material adhesion and preventing conveyor belt slippage. Feature:- Wear Resistance: The diamond patterns enhance the wear resistance of the rubber pulley lagging, effectively protecting the roller surface from wear
- Reduced Belt Slippage: The diamond patterns provide additional friction, increasing the traction between the roller and the conveyed material, and preventing slippage and misalignment.
- Extend Conveyor Belt and Drum Service Life
-
Diamond Strip Lagging is designed for use as lagging of conveyor belt pulleys to increase grip, and reduce wear and corrosion of the pulley shell. It could prevent any type of belt slip, increase the productivity life of your conveyor pulley -
Uncured Intermediate Rubber(tie gum) is designed to bond to cured cover rubber in all standard grades of steel cord and fabric conveyor belts. Uncured intermediate rubber used for hot splicing is formulated to withstand the vulcanization process and to adhere effectively to the conveyor belt's carcass or core material. It needs to have the necessary properties, including heat resistance and adhesion, to ensure a reliable belt hot splicing -
Uncured Cover Rubber (Cover Rubber Sheeting uncured) is an uncured rubber for conveyor belt hot splicing. It is designed for use as a cover rubber replacement material in splicing steel cords and fabric conveyor belts. the uncured cover rubber(Cover Rubber Sheeting uncured) has the following advantages: Wear Resistance Enhancement; Core Layer Protection; Prevention of chemical corrosion of uncured intermediate rubber, and Operational Efficiency -
Rubber Skirt is specially made of polyurethane and soft rubber, the rubber made of high-quality latex, and is resistant to highly abrasive and fine-grained materials. It used on the conveyor loading zone to keep material on the conveyor belt and reduce material spillage and dust. The high wear resistance of polyurethane skirting makes long service life available, usually 3 times longer than rubber skirting board. It is also supplied with/without BL bonding layer, reinforcing fabric layer is also possible.
