-
Belt noodle gum is an uncured black rubber for the belt hot vulcanized splicing, it used as a noodle rubber for steel cord belt splicing or finger splicing of fabric belt. the material can be used to bond to cured inter-core in all standard grade steel cord belts, as well as bond improvement material for fabric belt. -
Ceramic Pulley Lagging is designed to be applied to conveyor drive pulleys operating in extreme conditions. It is suitable for use in wet and dirty conditions and high belt tension applications. It can also be used in conditions of dirt, icing, or steep slopes -
Ceramic rubber wear liner is made from rubber or polyurethane, alumina ceramic tiles, and steel backing plate through the hot vulcanizing process. it is applicated for bins, hoppers, chutes, etc -
We distribute cold adhesive of high quality at a reasonable price, including Germany TRS cold vulcanizing cement, PU adhesive, cleaning solvent, metal premier, etc. It is used for removing the oil and dirt from rubber and metal surface so as to provide a clean and dirt-free environment for intensive bonding. -
CN Filler Rubber is a black, premium grade, thin rubber plate with CN bonding layer on both sides, it is designed for use in repairing conveyor belts or bonding rubber to steel surfaces. -
We distribute TRS cold adhesive with hardener, high quality at a reasonable price. Fire Resistance, Wear Resistance (Conform to the 1000M standard) -
Conveyor belt fastener uses Stainless, stainless steel, alloy, etc as material which makes sure it has high strength and enough toughness, It can make conveyor belt splicing quick and easy -
Conveyor Belt Repair Fabric is especially used for the repair of damage to conveyor belt ply and covers in heavy operating conditions or applications, which require maximum tear strength and puncture resistance. -
Rubber Skirt is specially made of polyurethane and soft rubber, the rubber made of high-quality latex, and is resistant to highly abrasive and fine-grained materials. It used on the conveyor loading zone to keep material on the conveyor belt and reduce material spillage and dust. The high wear resistance of polyurethane skirting makes long service life available, usually 3 times longer than rubber skirting board. It is also supplied with/without BL bonding layer, reinforcing fabric layer is also possible. -
Diamond repair patches are used for minor damage repair of the conveyor belt, they are designed as material for simple quick, and durable repair of surface damage on the conveyor belt, they mainly make in Rhomboid and Round Shapes. -
Diamond Rubber Pulley Lagging is the most commonly used lagging sheet, it is suitable for lagging drive roller of fabric conveyor belts and high-strength steel cord conveyor belts, It features diamond patterns engraved on a wear-resistant rubber base, providing higher friction compared to plain rubber pulley laggings. This increased friction enhances the power output efficiency and stability by improving the friction between the drive roller and the conveyor belt. and the diamond rubber pulley lagging is pre-grooved, with diamond-shaped grooves that expel debris, protecting the roller from material adhesion and preventing conveyor belt slippage. Feature:- Wear Resistance: The diamond patterns enhance the wear resistance of the rubber pulley lagging, effectively protecting the roller surface from wear
- Reduced Belt Slippage: The diamond patterns provide additional friction, increasing the traction between the roller and the conveyed material, and preventing slippage and misalignment.
- Extend Conveyor Belt and Drum Service Life
-
Diamond Strip Lagging is designed for use as lagging of conveyor belt pulleys to increase grip, and reduce wear and corrosion of the pulley shell. It could prevent any type of belt slip, increase the productivity life of your conveyor pulley
